Product photography is how you show shoppers exactly what they’re buying. When someone visits your online store, your photos are the closest they’ll get to picking up a product and turning it over in their hands.
That’s why shoppers rely on those images to make decisions. In Baymard Institute’s product page research, 42% of users tried to work out a product’s size from the product page images. One test participant even gave up on a lamp because the images didn’t show contextually how tall it was.
You can shoot product photos yourself with a smartphone or camera, natural light through a window, and a few low-cost supplies. This guide covers the main types of product photography, the equipment you need at three budget levels, an eight-step DIY process for shooting on a white background, and fixes for common problems like gray backgrounds, glare, and inaccurate color.
What is product photography and how do you do it?
Product photography is commercial still-life photography that shows products accurately for ecommerce stores, advertising campaigns, and catalogs, and you do it by combining styling, controlled lighting, and retouching. The result is a set of images that shows shoppers exactly what they’re buying.
You can hire a professional photographer for this work or take the photos yourself, which is known as DIY product photography. Going the DIY route, you’ll need a smartphone or camera, a light source like a window, and a clean background, often just poster board taped to a table. From there, you need to set up your space, shoot the product, and edit the images so they’re ready for your store.
Why do my product photos look homemade?
Product photos can look homemade when the setup is not controlled. The light changes or the camera moves. The product has dust, wrinkles, or fingerprints. Small details like these are easy to notice in close-up photos.
Check these areas first:
- Lighting. Natural light can change by the second, which makes a product gallery look uneven. For steady light, use an artificial light source like an LED panel or strobe, and fit it with a softbox, which diffuses the light to soften harsh shadows.
- Product prep. Clean the product before you shoot. Remove dust and fingerprints. Steam the fabric and use a lint roller to remove loose fibers. These details show up in ecommerce photos.
- Camera stability. Use a tripod when possible. It keeps the frame steady and makes it easier to shoot the same product from multiple angles.
- Sharpness. Small products and close-up shots can lose focus. For items like jewelry, watches, cosmetics, or detailed packaging, focus stacking keeps more of the product sharp.
- Editing. Use editing to clean up the image. If the lighting, focus, and product prep are off, editing will take longer, and the photo may still look inconsistent.
Types of product photography
Different products and platforms call for different photography styles. Understanding when to use each type helps you create a complete visual story for your brand.
Here are the most common types of product photography for ecommerce, and how each one earns its place.
White background photography
White background photography places your product against a plain white backdrop, with no props or scenery in the frame. That way, shoppers get a clear view of the product’s shape, color, and details. Using the same white background across your catalog also keeps your product pages consistent.
If you sell on Amazon, a white background isn’t optional for your main image. Amazon’s product image requirements call for a pure white background, with the product filling at least 85% of the frame. Walmart Marketplace also asks for a seamless white background on main images. Etsy’s image guidelines focus on photo size and shape instead, so you’re free to use a colored or styled backdrop there.
Fragrance brand DedCool puts every product on a white background on its product pages.

When to use: Main images on Amazon and Walmart, primary product photos on your own store, and anywhere you want the product to be the only thing in view.
Studio photography
Studio product photography is shot in a controlled set. The photographer chooses the backdrop, props, lighting, and product position before taking the photo.
This style works well when you want more control than a lifestyle shoot. For example, use a colored backdrop for a skincare product, a textured surface for jewelry, or a styled tabletop scene for home goods.
The idea is to show the product clearly while giving the photo a planned look. Keep the product as the main focus. Use props only when they help show scale, use, or brand style.
When to use: Ecommerce product pages, ads, catalogs, and launches where every image should feel consistent.
Lifestyle photography
Lifestyle photography shows your product in use in a real environment with relevant context. These shots help shoppers imagine owning and using your product. A coffee mug photographed on a cozy desk with morning light tells a different story than the same mug on white seamless paper.

This approach gives shoppers context for where and how people actually use the products. If you sell hiking boots, show them on someone’s feet during a hike. For selling clothing, show your apparel on someone walking in an appropriate setting.
When to use: Product pages, social media content, homepage hero images, email marketing material, brand storytelling.
Flat lay photography
For flat lay shots, arrange products and any relevant styling details on a flat surface, then photograph the arrangement from directly above.
This style works particularly well for smaller items, product collections, and “what’s in the box” content. The bird’s-eye perspective creates a clean, organized aesthetic popular on Instagram and Pinterest.

When to use: Social media, product bundle imagery, subscription box reveals.
Detail and close-up photography
To give shoppers a closer look at things that are hard to make out in a full product shot, incorporate close-ups in your product shot list.
Use detail shots for the parts of your product a wider photo can’t show clearly, like the grain on a leather bag or the clasp on a necklace.
Check out how leather retailer Hardgraft uses close-ups to show the zippers, handles, and other details of their goods on their product pages.

When to use: Secondary product images, highlighting premium materials or unique features, supporting product descriptions.
Scale photography
Scale photography shows how big your product is by pairing it with something familiar, like a hand, a person, a piece of furniture, or an everyday object. On a plain white background, shoppers have nothing to compare your product to, so a scale shot gives them that reference point.
It’s a shot a lot of stores skip. Baymard Institute found 37% of leading ecommerce sites don’t include an “in scale” image. To make one, place a person, a hand, or an object of a known size next to your product, like a model holding a camera or a lamp on a side table.

When to use: Any product where size might be unclear, like jewelry, home goods, and furniture.
Group and packaging photography
Group shots show several products together in one frame. That might be every item in a bundle, a full collection laid out side by side, or each color option of the same product.
When you set up a group product shot, leave a little space between items so nothing overlaps or hides another product’s key features. Then check that the light falls evenly across the whole frame, so no item sits in shadow.
Packaging photography focuses on what your product arrives in, like the box, bag, tissue paper, or inserts. You can shoot the packaging closed, open with the product inside, or in stages that show each step of unboxing. If your packaging has a printed design or brand details, angle it toward the camera and make sure those details are in focus.
Notice how Beardbrand uses group shots to show every product included in their bundles.

When to use: Product bundles, subscription boxes, gift sets, showing product range.
360-degree photography
360-degree photography creates an interactive view that shoppers can rotate to inspect a product’s front, back, and sides. Showing the top or underside requires additional camera angles.
To create a basic spin, place the product on a turntable and photograph it at regular intervals through one full rotation. Software displays the images as an interactive sequence. Allow extra time for shooting, editing, and adding the viewer to your product page.
Outdoor furniture brand Yardbird lets shoppers click and drag to see their products from every side.

When to use: High-consideration purchases, products with important details on multiple sides, furniture, electronics.
Most successful product pages combine several of these photography styles, such as white background for the primary image, lifestyle shots to set context, and close-up detail photos to highlight quality. The mix depends on your product, your brand, and where your customers shop.
Product photography setup: essential equipment
Building a functional product photography setup doesn’t require professional equipment. Here’s what you need to get started:
Camera
The camera you choose plays a crucial role in the quality of your product images.
A DSLR or mirrorless camera gives you manual control over exposure and focus, but a smartphone can also produce clear product photos. Before buying new equipment, test your current camera with steady lighting and a tripod. These smartphone product photography tips explain how to improve the results.
Start with whatever camera you have available and assess the results. Remember, the camera is just one piece of the puzzle. Great product photography is the result of thoughtful lighting, exposure, styling, and post-processing decisions.
Lenses
Your lens affects how much detail shoppers can see.
For standard product photos, a 50 mm lens can work well because it gives a natural-looking view of the product. For small items, use a macro lens or macro setting. This helps capture details like texture, stitching, labels, and packaging.
Keep the camera steady. Use a tripod and a remote shutter release, or set a short timer before the photo is taken. This helps reduce blur from camera movement.
Use manual focus when the product is still. Autofocus can shift between shots, especially with small products or close-up details.
For close-ups, take a test photo and zoom in on the screen. If part of the product looks soft, adjust the focus or try focus stacking.
Focus stacking combines several photos taken at different focus distances into one image that keeps more of the product sharp. With your camera on a tripod and set to manual focus, take a photo focused on the front of the product. Shift the focus slightly farther back for each additional shot until you reach the back edge.
In Photoshop, load the photos as layers, then go to Edit > Auto-Align Layers, followed by Edit > Auto-Blend Layers > Stack Images, to merge them.
Tripod
A tripod is a three-legged stand that supports and stabilizes your camera. It’s crucial for product photography, ensuring consistent framing and composition across multiple shots.
Tripods are particularly useful when shooting with slow shutter speeds, which are often necessary when using small apertures to achieve greater depth of field. They’re simple to use: Set up the tripod on a stable surface, attach your camera, and adjust the legs and head to experiment with different heights and angles.
For beginners, an affordable tripod is perfectly adequate. Check reviews for good, stable options in your budget.
Optimal lighting conditions
You have four main lighting options for product photos. Natural light and continuous LED lights are light sources. Softboxes and lightboxes shape and soften the light that comes from a source.
Natural light is daylight from a window or outdoors. It’s free, and a large window next to your table gives broad, soft light. The catch is that natural light shifts with the time of day and weather, so brightness and color can change during a shoot. Outdoors, you may need diffusers or reflectors to keep the light under control.
Continuous LED lighting, like an LED panel, stays on while you shoot, so you can see how the light falls on your product before you take the photo. It holds the same brightness and color for the whole shoot, and many panels let you adjust both settings.
A softbox is a fabric box with a diffusion panel that fits over an artificial light. It spreads the light over a larger area to soften harsh shadows and reflections. It doesn’t produce any light by itself, so you’ll need an LED light or strobe to put inside it, plus room for a stand.
A lightbox is a small, enclosed tent with translucent walls, and some come with built-in LEDs. It surrounds your product with even light and sets up quickly. It only fits small to medium products, and keep in mind even light leaves few shadows, which can make products look flat.
The distance between your product and lighting source changes your shot’s lighting quality, too. Moving a light closer to the product makes it brighter and softer, with gentler shadow edges. Moving it farther away makes it dimmer and harder, with sharper shadows. Take a few test shots at different distances to find the look you want.
White background
A clean white background and proper light control are fundamental for professional-looking product photos.
There are numerous options for white backgrounds. If you’ll be shooting frequently, consider investing in a white sweep (a curved white background that gives a seamless effect). Paper sweeps are particularly useful, as you can cut off dirty sections and roll down fresh material.
For a budget-friendly option, visit your local art or drug store and purchase posterboard. Opt for pure white, as off-white or cream backgrounds are more challenging to edit to pure white in post-processing.
Table
A table allows you to adjust the background, lighting, and products for various setups.
Standard folding tables are fine for product photography. Choose a table wide enough to accommodate your largest products with room for bounce cards on either side.
Cover the table with your chosen background material, allowing it to curve up against a wall or backdrop stand for a seamless look. Make sure you can work comfortably, whether standing or sitting. The table doesn’t need to be aesthetically pleasing, since it will be covered, so focus on stability and appropriate size.
Tape
Tape is a great tool for holding your background in place.
To avoid damaging your table, use strong, removable tape like painter’s tape or gaffer’s tape. Secure the edges of your background material (such as posterboard or seamless paper) to the table. Ensure it’s taut and wrinkle-free, particularly where it curves up against the wall or backdrop stand.
Props
Props can help tell your product’s story by setting the scene, showing scale, or demonstrating use. However, it’s crucial to strike a balance: Props should enhance, not overshadow, your product.
For example, when photographing a coffee mug, you might include coffee beans, a book, or a pastry to create a cozy scene. Arrange props naturally around the product, making sure they don’t obscure key features.
Consider color when choosing props to avoid clashing with your product. Take test shots and adjust your arrangement as needed to create a balanced, inviting image.
Equipment by budget tier
Your budget shapes your setup, but every tier can produce sellable, professional-looking images if you understand the limits and play to the strengths of your gear. You actually don’t need a full studio to get started.
Here are three product photography setups to consider based on your budget:
- Starter (minimal investment). Smartphone camera, posterboard background, natural window light, DIY reflector (white foam board or printer paper). This setup works for testing products and building initial listings.
- Intermediate (dedicated setup). Entry-level DSLR or mirrorless camera, paper sweep background, basic tripod, foam board reflectors, optional softbox or ring light. This level handles most product photography needs for growing stores.
- Professional (studio quality). Full-frame camera, quality lenses, professional backdrop system, multiple light sources with modifiers, and photo editing software subscription. Consider this tier when photography volume justifies the investment or when product quality demands it.
Start with what you have. Upgrade individual components as you identify specific limitations in your current setup.
This is exactly what Piecework Puzzles did: “We created it all from scratch ourselves, for better or worse. I mean, some of those early photo shoots were literally in my grandmother’s garage, and we didn’t actually have a shot list for our first puzzle art shoot, which is just amazing in hindsight,” says cofounder Rachel Hochhauser.
How to take professional product photos on a white background
- Set up your table
- Set your sweep
- Adjust your camera
- Set up your product
- Set up your reflector card
- Take the picture and evaluate
- Retouch your pictures
- Optimize images for your website
High-quality product photos can significantly boost your customers’ confidence in your offerings. While photo editing is important, the foundation of great product photography lies in the initial shoot.
These eight steps walk you through the complete process, from setup to final export.
1. Set up your table
With your gear assembled, it’s time to create your shooting area:
- Position your table close to a window, without intersecting the windowsill’s shadow.
- Start with the window at a 90-degree angle to your setup.
- The closer you are to the window and the larger it is, the softer your light will be.
Key tip: Turn off all other lights in the room before you shoot. Daylight and household bulbs give off light at different color temperatures, and your camera can only set its white balance for one at a time. If both light your product, parts of it can pick up a color cast that’s hard to correct in editing.
Experiment with different setups:
- Try rotating your set so the window is at a 45-degree angle.
- Position the window directly facing your set for varied natural lighting effects.
- For food photography, consider placing the window behind your setup for a dramatic effect.
- A garage with an open door can mimic window light without glass interference.
- Avoid direct sunlight on your set, as it creates harsh shadows unflattering to most products and people.
2. Set your sweep
A sweep is a single piece of material, typically white paper or fabric, that curves smoothly from a vertical position to a horizontal one. This seamless transition gets rid of any sharp corners or blemishes in the background, creating a clean, professional look for your product photos.
To set up your sweep:
- Position the top of the sweep material vertically, then let it curve gently onto the horizontal surface of your table.
- You may need to gently roll the board to achieve the right curvature.
- The goal is to create a smooth, uninterrupted background that transitions from behind your product to underneath it.
Setup options:
- If possible, place the table against a wall and tape the sweep to both the wall and table.
- Without a wall, create a support for the back of the sweep using bricks or a wooden block.
Position your product in the center of the flat part of the sweep, leaving room to add a white reflector card later. This setup will make sure your products appear to float in a clean, distraction-free environment, drawing all attention to the item you’re showcasing.
3. Adjust your camera
While every camera is different, here are some general guidelines to get you started:
- Set your white balance (WB) to match your light source, like Daylight for window light. For the most accurate color, set a custom white balance by photographing a gray card or plain white paper under your lighting, then selecting that photo in your camera’s custom white balance menu.
- Turn off the flash.
- Use the highest quality image settings available. If your camera shoots RAW, use it for maximum editing flexibility. If not, choose the largest JPG setting, such as Large for image size and Superfine for quality.
- Set ISO to your camera’s lowest standard setting, also called base ISO, to keep digital noise to a minimum.
Exposure settings
Baseline settings for still products
With your camera on a tripod, you can prioritize image quality over motion concerns:
- ISO: Start at your camera’s base ISO to minimize noise and grain.
- Aperture: Start with a mid-range aperture, around f/8 to f/11, to keep the product sharp from front to back.
- Shutter speed: Adjust until the exposure looks right. Since you’re using a tripod, slower speeds are fine.
These are starting points. Every camera and lighting situation is different, so adjust based on your results.
For shallow-depth lifestyle photos
To isolate a specific detail and blur the background:
- Aperture: Open wider (around f/2.8 to f/4) for shallow depth of field.
- Shutter speed: Keep it fast enough to avoid camera shake if shooting handheld.
- ISO: Increase as needed to achieve proper exposure.
Use this background blur (bokeh) to draw attention to textures, logos, or specific product features.
For flash/strobe setups
When shooting with a flash or strobe, check these settings:
- ISO: Keep it at or near base ISO for clean images.
- Aperture: Use a smaller aperture, and adjust your flash power to match.
- Shutter speed: Check your camera’s flash sync speed and stay at or below it.
Consult your flash and camera manuals for specific sync speed limitations.
Don’t rely on the camera’s preview image alone. Check the histogram to confirm your exposure, and adjust until the curve representing the white background touches the right edge without going over.
4. Set up your product
Positioning your product may seem simple, but it often requires careful attention to detail. For items like bottles, make sure the label is centered and straight. Expect to make numerous small adjustments to achieve perfect alignment.
5. Set up the reflector card
A white reflector card bounces light back onto your product to fill in the shadows on the side facing away from your light. Stand it up on the opposite side of the product from your window or light, just outside the camera’s frame. Take a test shot, then tilt the card or move it closer to brighten the shadows, or farther away to keep more of them.
6. Take the picture and evaluate
After capturing your image, take time to examine what you’ve created. This is where experience and education come into play:
- What aspects are working well?
- What could be improved?
- How can you enhance the overall image?
Experiment with different techniques to refine your skills over time. Upload your images to a computer for a more accurate view, as camera displays can be misleading. Consider using software like Lightroom to organize and perform initial edits on your images.
7. Retouch your pictures
After your shoot, you should have a properly exposed product against a light gray background. Retouching turns that into a finished product photo.
Use retouching techniques to:
- Clean up the background.
- Remove distracting shadows.
- Adjust brightness and contrast.
You can handle a lot of this right in your Shopify admin with Sidekick. On the Basic plan and above, the media generation tools in the file editor let you:
- Replace a background with a solid color or make it transparent, with automatic subject detection you can correct by hand.
- Change the background, scene, or lighting by describing what you want in a text prompt.
- Extend the background past the photo’s edges to change the framing (desktop only).
You can also ask Sidekick in the chat to generate new images from a text prompt, using up to five of your own photos as references.
Check every AI-edited image before publishing. The file editor generates images at about 1 megapixel and scales larger source images down during generation. Compare the result with the real product to confirm that its color, shape, and details are accurate, and keep your original high-resolution files.
Hang on to your originals, too. In the file editor, click Save as new instead of Save so the edit is stored as a separate file, and keep full-resolution copies of your original photos on your computer. If you change your mind mid-edit, Revert to original discards all changes to the image.
How shoppers respond to AI imagery can also depend on what you sell. In a 2026 experiment published in Frontiers in Computer Science, an “AI-generated” label on a power bank photo lowered how authentic and appealing participants rated the image. The same label on a perfume photo had no measurable effect on how appealing it looked.
If you’d rather hand retouching off, services like Pixelz and Path offer per-image pricing for large batches.
8. Optimize images for your website
Image file size affects how quickly your product pages load, since every image has to download before shoppers can see it. Aim for a balance between quality and size. Smaller files load faster, but compress an image too much and it can look blotchy or blurry. To do this, resize each image to fit where it appears on your site, then compress it.
Resize for the container
An oversized image can slow a page when the browser downloads a file larger than the display requires. Responsive images reduce this problem by providing different sizes for different screens.
On Shopify, a lot of this resizing is handled for you. Shopify themes can serve responsive images: Shopify creates versions of each photo at several widths, and the shopper’s browser downloads the one that fits their screen. Shopify also chooses the file format for each shopper, delivering modern formats like WebP and AVIF to browsers that support them.
Figure out the HTML container size
- Use your browser’s Developer tools to inspect the image element.
- Right-click on the image and choose “Inspect Element.”
- The sidebar will show the container’s pixel dimensions.

Pro tip: For sharp images on high-resolution displays, size your images larger than the container dimensions. Check current best practices for retina display optimization.
Resize the image

Resize images with an editor such as Preview on Mac or Microsoft Photos on Windows:
- Open the image and find the resizing controls.
- Set the dimensions for the intended display size, allowing extra resolution for high-density screens and product zoom.
- Save a separate copy and inspect it at full size before uploading.
Compress the image
Compression shrinks your file size by removing image data. Shopify accepts both JPEG and PNG product images. JPEG uses lossy compression to keep files small, so it’s a good fit for most product photos. PNG supports transparency, so use it for images with a transparent background, like a cutout you made in the file editor.
Shopify also optimizes delivery for you: images served through your theme can be compressed, and they’re delivered in modern formats like WebP and AVIF, when the shopper’s browser supports them. Compressing before you upload keeps your original files smaller, too.
To compress an image file:
- Use Photoshop’s Export As option or a dedicated tool like JPEGmini.
- Check the result at full size, since too much compression can make images look blotchy.
Export settings to use:
- Image size: Large enough to stay sharp on high-resolution screens
- Format: JPEG for most photos, PNG for transparent backgrounds
- Color space: sRGB
Platform-specific image requirements
Each platform you sell on has its own image specs, so check them before you upload.
Here’s what to know for the major ones:
- Shopify. Product images can be up to 5,000 by 5,000 pixels and must be smaller than 20 megabytes, and Shopify recommends 2,048 by 2,048 pixels for square product images. Use the same aspect ratio for all your featured images so they display at the same size on collection pages.
- Amazon. Your main image needs a pure white background. Amazon may remove a listing from search until it has an image that meets the requirements.
- Instagram and Facebook. Meta sets its own image specs for product catalogs. Check Commerce Manager for the current requirements before you upload.
- Google Merchant Center. Google has its own product image requirements, and listings with images that don’t meet them can be disapproved. Check the Merchant Center documentation, especially if a listing gets flagged.
If you sell on more than one marketplace, Shopify Marketplace Connect lets you manage listings, orders, and inventory for Amazon, Walmart, eBay, and Target Plus from your Shopify admin. Each marketplace’s image rules still apply to the listings you sync, so check your main images against them before you publish.
Expert product photography tips
Consider these tips when taking product photos:
Use window light vs. lightbox
Window light is a one-light setup: a window, your product, and a reflector card. It’s free, but it changes over the course of a shoot, so you may need to adjust your camera settings as you go.
A lightbox with built-in LED lights is also simple to use. Place your product inside and switch on the lights, and the translucent walls spread the light evenly around it. Because the light comes from every side, it leaves few shadows. Since shadows help show a product’s shape, that can make some products look flat.
Setups with multiple external lights, like two or three LED panels or strobes fitted with softboxes, take more technical knowledge.
Here’s what’s involved:
- Cost. Each light, stand, and modifier is a separate purchase.
- Exposure. You’ll need to position each light and balance their brightness. That means understanding how aperture, shutter speed, and light power work together.
- Color balance. Your camera can only set its white balance for one color temperature, so all your lights need to match.
- Flash. Strobes add sync speed limits and need a trigger to fire them.
Clear and highly reflective products, like glass bottles and polished metal, reflect everything around them, including your lights and camera. If your DIY results with these products aren’t quite what you want, they’re a good candidate for professional help.
Use foam boards
Foam boards let you control where light goes and where shadows fall.
There are two types of foam boards:
- White foam boards. Use these to bounce light back into shadows and brighten the darker side of your product.
- Black foam boards. Use these to deepen shadows and add contrast. When you’re shooting a white product on a white background, place black boards just outside the frame on either side to give the product’s edges a darker outline, so it doesn’t blend into the background.
You can use both at once. Put a white board on the side opposite your light to fill in shadows, and a black board on another side to add contrast where you want more depth.
Hold foam boards upright with clamps, brackets, or folded stands so you can reposition them between shots. You can find them at craft stores, office supply stores, and online. In a pinch, white printer paper or poster board can stand in for white foam board.
Learn basic photo editing techniques
When you edit your own photos, you decide how the final image looks, and you don’t need to pay for an editing service. You can also crop and adjust the same shot for different places, like your product page, social posts, and emails.
To get started, try Adobe’s free Photoshop tutorials. Once you know the basics, pick a photo editing tool that fits your needs and budget.
Run through this checklist for each product photo:
- Remove dust, scratches, lint, and small marks.
- Make sure the product is bright enough to see clearly.
- Fix color casts so white, gray, and neutral areas look accurate.
- Add enough contrast to show shape and texture.
- Clean up shadows, uneven edges, or distractions.
- Keep the product framed the same way across the gallery.
- Apply the same basic edits to similar images so the full product set looks consistent.
- Compare the photo with the real product before publishing.
Shoot multiple angles
A single photo can only show one side of your product, so shooting from several angles shows shoppers the parts they’d otherwise have to guess at.
Here are the main angles to try:
- Eye level. Shows the product straight on, at the height you’d see it on a shelf.
- High angle. Shows the product from above, tilted slightly toward the camera.
- Low angle. Shows the product from below.
- Bird’s eye. Shows the product from directly overhead.
- Three-quarter. Shows the front and one side at once, which gives a sense of the product’s depth.
- Back view. Shows the back of the product, like the fastenings on clothing, the inside of a bag, or the ports on electronics.

For front, side, and back views at the same height, keep the camera fixed and rotate the product. Reposition the camera for overhead, high-angle, and low-angle shots, then check the framing and lighting again.
Consider hiring help
If your DIY setup isn’t getting the results you want, a professional photographer is another option. Here’s what to weigh up:
- Cost. Professional product photography pricing depends on how complex your products are, how many images you need, and the photographer’s experience. Request quotes from a few photographers to understand rates in your area.
- ROI. In a 2026 study, participants who rated product imagery as more visually appealing also reported greater purchase intention. To assess the return for your store, compare photography costs with changes in conversion rate and revenue after updating your images.
- Expertise. Professionals bring their own lighting and studio gear, which helps with tricky products like glass, jewelry, and highly reflective surfaces.
Professional help makes sense particularly for challenging products (e.g., glass, jewelry, highly reflective surfaces) where DIY limitations become apparent. A single session with a professional can also teach you techniques to improve your own work.
When you compare photographers or studios, ask each one:
- Can I see examples of products like mine?
- What’s included in the price, like retouching, the number of final images, and rounds of revisions?
- Can you deliver images to each marketplace’s specs, like Amazon’s pure white main image?
- What file formats and sizes will I receive, and can I use the images anywhere?
- How long does a shoot take, from receiving my products to delivering the images?
To find photographers who already work with Shopify stores, browse the Shopify Partner Directory. You can filter Partners by service, price range, location, and industry, sort by rating, and contact them with your budget and timeline before you commit.
Troubleshooting your product photos
Even with the best equipment, you can run into issues where your photos don’t look quite right. Here are quick fixes for the most common product photography issues:
The background isn’t pure white
A white background can appear gray when the camera’s automatic exposure darkens the scene. Increase exposure gradually while checking that bright areas of the product retain their detail. If the product is correctly exposed but the background is gray, brighten the background separately with lighting or a selective edit.
For images that require a pure white background, check several background areas with your editor’s eyedropper tool. Pure white reads RGB 255, 255, 255. Keep the adjustment off the product so its edges, texture, and color stay accurate.
The product looks flat or has no depth
This is often caused by lighting the product directly from the front like using a built-in flash. Move your light source to the side to create shadows that define the shape. You can also place a black foam board on the side opposite the light to deepen shadows and add contrast.
Harsh reflections on glossy products
Small, hard light sources create glaring hotspots on shiny surfaces. To soften them, fit your light with a softbox or hang a diffuser sheet between the light and the product so the light spreads out. You can also try angling the product slightly so the reflection moves out of the frame.
A circular polarizing filter (CPL) on your lens can cut glare from nonmetallic surfaces, like glass, glossy plastic, and coated packaging.
Rotate the filter while you look through the viewfinder or screen until the reflection fades, which works best when the light hits the surface at an angle rather than straight on.
A CPL won’t do much for reflections from bare metal, like polished steel or silver jewelry. For those, use a large, diffused light and surround the product with white cards so the metal reflects clean, even white instead.
Colors don’t match the real product
Different light sources have different color temperatures, which can tint your product’s colors. Set your camera’s white balance to match your light source.
For more accurate color, include a gray card in a test shot, then click the gray card with the white balance eyedropper in your editing software to correct the color across your photos.
When you export, use the sRGB color space. sRGB is the standard color space for the web, so exporting in it helps your images look consistent across browsers and devices. It can’t make colors look identical on every screen, though, since displays vary in their brightness, color settings, and calibration.
Before you publish, check your photos on a couple of devices, like your computer and your phone, and compare them with the real product.
Reflective or transparent products look wrong
Glass, jewelry, and metallic surfaces create unique challenges because they reflect their environment, including your camera, lights, and room. For reflective products, try using a light tent or surrounding the product with white cards to create clean, even reflections.
For transparent products like glass or bottles, light from behind or to the side rather than from the front. Consider placing the product on a reflective surface (acrylic or glass) for additional visual interest. These products often require experimentation, so take test shots and adjust your setup incrementally.
Maximizing your product photos
Use this checklist to plan and run your next product photoshoot:
- Choose the shots each product needs, like a white background main image, a scale shot, and a detail shot.
- Set up your table, sweep, and reflector card next to a window, with all other lights off.
- Set your white balance to match your light and your ISO to base ISO.
- Rotate the product for front, side, and back views. Reposition the camera for overhead, high-angle, and low-angle shots.
- Retouch, check that the background reads RGB 255, 255, 255, and compare the colors with the real product.
- Export in sRGB, check each platform’s image specs, and upload.
When you’re ready to build out your kit, explore these product photography tools or this guide to ecommerce photography.
Read more
- AliExpress Dropshipping- How to Dropship From AliExpress
- 25+ Ideas for Online Businesses To Start Now (2024)
- How to Start a Dropshipping Business- A Complete Playbook for 2024
- How To Source Products To Sell Online
- The 9 Best Dropshipping Websites for Your Online Store
- The 13 Best Dropshipping Suppliers in 2024
- The Ultimate Guide To Dropshipping (2024)
- How to Sell Art Online- The Ultimate Guide
- The 25 Best Website Designs—and the Creative Businesses That Power Them
- Food Photography 101- How to Take Perfect Pictures of Your Food
Product photography FAQ
What is product photography?
Product photography involves using specific techniques to capture accurate and attractive photos of your products. These photos influence shoppers’ purchasing decisions, potentially increasing conversion rates and sales.
What equipment is needed for product photography?
A basic setup needs a smartphone or camera, a stable tripod, background material, and a light source such as a window or LED light. A white reflector brightens shadows. For artificial lighting, a softbox can soften the light. Macro lenses and additional lights are useful for more demanding products.
How do online stores get product photos?
Online stores typically create product photos through DIY photography (using the techniques in this guide), hiring freelance photographers, using product photography services, or requesting images directly from suppliers or manufacturers. Stores often combine approaches—DIY for most products and professional help for hero images or challenging items.
What makes a good product photo?
A good product photo accurately represents the product, uses clean and consistent lighting, shows relevant details, and matches the context where it will appear. For ecommerce, this means sharp focus, true-to-life colors, appropriate backgrounds for the platform, and enough angles to answer customer questions before they ask.












